| Question / Issue |
 |
| Signal strength not being updated. |
| Answer / Solution |
|
On the LAN-Cell 2, the signal strength values shown in the Cellular Interface Status section of the Home screen are only updated when the Home screen is refreshed. You can set the Home screen refresh rate to 10, 20 or 30 seconds to get periodic updates of the cellular card's signal strength.
Note that some 3G cellular cards are not able to report updated signal strength information when they are actively connected to a cellular network and tranmitting or receiving data. Those cards will not update the signal strength values on the Home screen -- the value shown is the last known signal strength reading. |
FAQ ID # 104
Send FAQ by E-mail
Add to favorites
Print this FAQ