Proxicast

FAQ ID # 155
Last Update : 2012/02/20
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ

Social Bookmark this Article :


Question / Issue
Attaching a Card-Guard pigtail to the Kyocera KPC-680 ExpressCard

Answer / Solution
  1. Remove the detachable plastic cover over the external antenna ports on the top of the KPC-680 ExpressCard by prying off one side slightly to release the clip.


  2. Attach the pigtail retaining clip included with the Card-Guard pigtail ANT-100-680 over the top of the KPC-680 until it snaps into place.


  3. Insert the ANT-100-680 pigtail connector into the antenna hole closest to the edge of the card, aligning the horizontal pins with the slots in the retaining clip.  Turn the pigtail connector one-quarter turn to lock the connector in place.


Direct Link to This FAQ
http://www.proxicast.com/AbsoluteFM/?f=155

Tags
kpc680 680 kwc lead antenna jack hole jumper
How would you rate this article?

Poor
1
2
3
4
5

Great
Submit

Back to Top