|
FAQ ID # 282
|
| Last Update : 2017/08/03 Rating : Not Rated |
Send FAQ by E-mail
Add to favorites
Print this FAQSocial Bookmark this Article : |
| Question / Issue |
 |
| Using the ZTE MF861 (AT&T Velocity USB Stick) with the PocketPORT 2 |
| Answer / Solution |
|
| When using the ZTE MF861 modem in a PocketPORT 2 which is configured for NAT Router mode operation, the LAN IP & subnet of the PocketPORT must be changed from its default value of 192.168.1.1 / 255.255.255.0.
The MF861 is factory programmed to use the IP address 192.168.1.1; the current MF861 firmware does not allow this value to be changed. Therefore, you must change the IP address/subnet of the PocketPORT to avoid an IP conflict. For example, change the PocketPORT's LAN IP to 192.168.2.1. No PocketPORT configuration changes are necessary for IP Pass-Through mode (the default) or for Virtual Cable mode operation. Note: Support for the MF861 modem was introduced in PocketPORT firmware release 2.2.90. |
| Related Links | |
|
|
 |
PocketPORT Firmware Updates Download the latest PocketPORT firmware |
| Direct Link to This FAQ |
|
| http://www.proxicast.com/AbsoluteFM/?f=282 |
| Tags |
|
