Proxicast

Topics > Firmware Updates > FAQ ID # 118

FAQ ID # 118
Last Update : 2014/01/08
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ

Social Bookmark this Article :


Question / Issue
LAN-Cell 2 reboots continuously

Answer / Solution

If the LAN-Cell 2 will not complete its boot-up cycle (Power LED never stops flashing), it may be because a non-supported 3G modem card is inserted.

Power off the LAN-Cell 2 and remove the 3G modem card.  Power on the unit and it should boot up normally.  Check the firmware version on the Home screen. 

Refer to the firmware Release Notes on the Support CD or on our Support Web site (http://www.proxicast.com/support/manuals.htm) for your firmware version.  You can upgrade to the latest firmware and card support by downloading a firmware package from our Support Web site:
http://www.proxicast.com/support/downloads.htm

If the LAN-Cell 2 will not complete a boot-up cycle with no 3G card inserted, please contact Technical Support for additional troubleshooting assistance.


Related Links
LAN-Cell Documentation & Release Notes
LAN-Cell Firmware Updates

Related FAQs
Where can I find the latest LAN-Cell firmware updates?
I lost my documentation CD. Where are the manuals?
The LAN-Cell 2 does not recognize my PC-Card modem.

Direct Link to This FAQ
http://www.proxicast.com/AbsoluteFM/?f=118

Tags
reboot power up start restart restarting fail fails stuck defective
How would you rate this article?

Poor
1
2
3
4
5

Great
Submit

Back to Top