Proxicast

Topics > LAN-Cell 2 > FAQ ID # 104

FAQ ID # 104
Last Update : 2012/02/20
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ

Social Bookmark this Article :


Question / Issue
Signal strength not being updated.

Answer / Solution
On the LAN-Cell 2, the signal strength values shown in the Cellular Interface Status section of the Home screen are only updated when the Home screen is refreshed.  You can set the Home screen refresh rate to 10, 20 or 30 seconds to get periodic updates of the cellular card's signal strength.

Note that some 3G cellular cards are not able to report updated signal strength information when they are actively connected to a cellular network and tranmitting or receiving data.  Those cards will not update the signal strength values on the Home screen -- the value shown is the last known signal strength reading.

Related FAQs
How does the CSQ value relate to RSSI?
Cellular Connection Status stays NOT REG or INIT for a long time.
AirCard 595 stuck in INIT status.
Signal strength reports 0 dBm (Poor) when dialing.

Direct Link to This FAQ
http://www.proxicast.com/AbsoluteFM/?f=104

Tags
RSSI signal strength readings CSQ aircard level
How would you rate this article?

Poor
1
2
3
4
5

Great
Submit

Back to Top