Proxicast

Topics > LAN-Cell 2 > FAQ ID # 119

FAQ ID # 119
Last Update : 2012/02/20
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ

Social Bookmark this Article :


Question / Issue
What TCP/UDP ports does the LAN-Cell 2 use by default?

Answer / Solution
With the factory default configuration settings, the LAN-Cell 2 uses the following TCP & UDP ports for its management applications.  If your application needs to communicate on one or more of these ports, you must either change your server application, or change the LAN-Cell's management ports using the ADVANCED->REMOTE MGMT screens.

Note: If you change the LAN-Cell's management ports, you must create Firewall Rules for the corresponding new ports in the packet directions of Cell-to-Cell/LAN-Cell and/or WAN-to-WAN/LAN-Cell.  Other Firewall changes may also be required depending on your specific application configuration.

Application Ports
FTP TCP/20 & TCP/21
SSH TCP/22
TELNET TCP/23
DNS UDP/53
HTTP TCP/80
SNMP UDP/161
HTTPS TCP/443
IKE (VPN) UDP/500


Direct Link to This FAQ
http://www.proxicast.com/AbsoluteFM/?f=119

Tags
ports nat port forward forwarding redirection PAT cam camera web server
How would you rate this article?

Poor
1
2
3
4
5

Great
Submit

Back to Top