Proxicast

Topics > LAN-Cell 2 > FAQ ID # 167

FAQ ID # 167
Last Update : 2012/02/20
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ

Social Bookmark this Article :


Question / Issue
How do I assign the same DNS name to both the WAN and Cellular interfaces?

Answer / Solution

If you are using the LAN-Cell 2 in a "fail-over" mode and want to be able to refer to the device via the same fully qualified domain name (FQDN) whether it is connected to the Internet via the wired Ethernet WAN port or the Cellular 3G modem, you must enable the High Availability (HA) option on the DDNS screen.

  1. Sign up for Dynamic DNS service with one of the supported DDNS providers (DynDNS, NO-IP, RegFISH)
  2. Define the desired DNS hostname with the DDNS provider
  3. In the LAN-Cell, go to ADVANCED > DNS > DDNS and enter the required Username & Password information
  4. Enter the fully qualified host and domain name that you created with the DDNS provider (e.g. mydevice.dyndns.com)
  5. Select the appropriate service type (if required by your DDNS provider)
  6. Select either WAN or CELL as the Interface
  7. Select "Use WAN IP Address" as the Update Policy
  8. Check the "HA" column
  9. Save and Apply these settings

Whenever the LAN-Cell receives an updated IP address over the WAN or Cellular interface, it will automatically contact the DDNS provider and update your defined FQDN host name with the currently active IP address of the LAN-Cell.


Related FAQs
Can I use a DDNS service other than DynDNS.org?
I'm having trouble with DynDNS updates
DynDNS.org updates have stopped working
Unable to access web sites when failed over from WAN to Cellular connection
Tech Note: Configuring WAN Fail-Over and Traffic Redirect on the LAN-Cell & LAN-Cell 2

Direct Link to This FAQ
http://www.proxicast.com/AbsoluteFM/?f=167

Tags
ip dns dyndns update renew fail over fail-over
How would you rate this article?

Poor
1
2
3
4
5

Great
Submit

Back to Top