|FAQ ID # 213|
|Last Update : 2012/04/01
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ
Social Bookmark this Article :
|Question / Issue|
|How to adjust the DHCP Lease Time on the LAN-Cell 2|
|Answer / Solution|
Use Telnet, SSH or the console port to access the LAN-Cell 2's Systems Management Terminal interface.
- Go to menu 24 option 8 to get to the command line
- Type: ip dhcp enifX server leasetime NNNN <enter>
so if you want to change the WLAN subnet:
You should also set the following 2 commands to be consistent with the leasetime:
ip dhcp enifX server renewaltime NNNN
The LAN-Cell default values for these settings are:
We suggest that you scale these to be the same ratio as the defaults. If you're trying to force clients to request a new IP every 2 hrs, then you should probably set renewal time to 2 hrs.
You can check the results of your changes using the command:
ip dhcp enifX status
Note: commands are case sensitive.
These settings will be saved into your config file and remain after a reboot, so make a backup of the config when you're done.
|What is the default IP address and password for the Telnet/SSH configuration screen?|
|Direct Link to This FAQ|