|FAQ ID # 158|
|Last Update : 2012/02/20
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ
Social Bookmark this Article :
|Question / Issue|
|Will increasing cellular signal strength increase throughput speeds?|
|Answer / Solution|
Signal strength does not have a direct correlation to throughput speed. but signal quality does, because poor signal quality will cause more packet retransmits, drops, etc. You can achieve good speed throughput even with low signal strength as long as the signal is constant and free frome excess noise and interference.
You can add a higher gain external antenna or place the antenna in a more favorable position to increase both signal strength and quality. Remember that the length of the coax cable and number of connectors will increase both the signal loss and noise. You also want to eliminate any sources of interference the may be present near the external antenna. Keep the antenna away from motors, radios, lights, CRTs, etc).A cellular signal amplifier, while it increases the signal strength to the modem, will also amplify any noise, multi-path or other interference detected at the antenna. This can sometimes lead to worse signal quality even though the signal is stronger. Amplifiers should only be used in situations where the signal without the amp is very low or no signal can be obtained without the smaplifier.
We recommend reviewing our TechNote on Cellular Antenna Issues for more information. (see below).
|TechNote: Cellular Antenna Issues|
|What external antennas or amplifiers can I use?|
|What is an antenna ground plane?|
|How can I improve cellular signal strength?|
|Speed tests of my 3G/4G modem are higher in a laptop than in the LAN-Cell.|
|Direct Link to This FAQ|
|speed upload download performance slow fast thruput csq rssi|