Proxicast

Topics > 3G/4G Modem and Carrier Issues > FAQ ID # 269

FAQ ID # 269
Last Update : 2013/11/12
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ

Social Bookmark this Article :


Question / Issue
Huawei HiLink Modems

Answer / Solution

Some Huawei USB modems have a mode called "HiLink" which provides for "driverless" installation on Windows, Macintosh and Linux computers.  These modems usually have the HiLink logo marked on the outside, or have optional HiLink firmware that can be installed on the device.

The current Huawei HiLink modem firmware operates as a NAT router rather than as a traditional modem.  HiLink provides no mechanism for the IP address assigned by the cellular operator to be "passed through" to the attached device, nor does HiLink provide any sort of port-forwarding capability.

For these reasons, HiLink mode cannot be used for remote access applications (e.g. Remote Desktop, VNC, web servers, etc.) where "inbound" connections are initiated by computers on the Internet.  To use HiLink mode, your application must require only "outbound" initiated connections (e.g. web browsing, email, etc.), or you must implement a VPN connection to another device which is initiated by the router which has the HiLink mode modem installed.

Where supported, Proxicast's products disable HiLink mode when initializing the modem.  To use HiLink mode, check this knowledgebase for instructions for your specific Huawei modem and Proxicast product.



Direct Link to This FAQ
http://www.proxicast.com/AbsoluteFM/?f=269

Tags
Huawei HiLink USB Modems
How would you rate this article?

Poor
1
2
3
4
5

Great
Submit

Back to Top