Proxicast Cell-PAKTM
Rugged Portable 3G + WiFi HotSpot
Powered by the LAN-Cell 2 Mobile 3G Cellular
Router
FEATURES
Mission Critical Wireless Communications
When the wired communications infrastructure is unavailable, damaged or overloaded, the Proxicast Cell-PAK provides crucial fast, effective and reliable high-speed cellular broadband communications. The Proxicast Cell-PAK can be a vital wireless communication link for first responders and others facing tough communications challenges.
Ready When You Are
The Cell-PAK is excellent for commercial, industrial, law enforcement, public safety or military use. Designed as a wireless "grab & go" solution, the Cell-PAK provides mobile 3G cellular Internet connectivity and local 802.11 a/b/g WiFi access in an easy-to-deploy portable form-factor.
Keep a Cell-PAK charged up and with the flip of a switch, high-speed wireless communications for your mobile team is available whenever and wherever they need it.
Works As Hard As You Do
More than just a "HotSpot in a box", the Cell-PAK is a 3G wireless mobile communications center. The Cell-PAK is a rugged, self-contained, battery-powered, portable WiFi HotSpot with 3G cellular Internet access. Its impact and water-resistant plastic case and on-board power pack are designed for prolonged operation in harsh environments.
The Cell-PAK features an intelligent power management system that provides 10+ hours of continuous battery operation on a single charge (runtime depends on many factors and may range from 10 to 16+ hours). It operates on 12-24 VDC and can be powered by AC, DC, vehicle or solar power and recharges while in operation. External antenna jacks provide additional flexibility for maximizing both cellular and Wi-Fi signal reception in even the most challenging situations.
| Key Case Features |
|
| • |
Ultra Rugged Molded Copolymer Plastic Case |
| • |
Meets MIL Spec C-4150J • Def Stan 81-41/STANAG 4280 • ATA 300 • Ingress Protection (IP) |
| • |
Impact Resistant - Drop Tested From 4 Feet |
| • |
Crushproof, Water Resistant and Dust Proof |
| • |
External Battery Pack Charging Port (12-24 VDC; 13.8 VDC min for full recharge) |
| • |
External SMA Cellular & WiFi Antenna Connectors |
| • |
Long Range Cellular Antenna + High Gain Wi-Fi Antenna |
| • |
12 Volt (7-8 AH) - SLA Battery Pack (10+ hours of LAN-Cell 2 runtime) |
| • |
Quick Charge System - Recharges Battery Pack in less than 3 hours |
| • |
Non-Stop Operation - Recharge Battery Pack while in operation |
| • |
Electronic Multi-Segment LCD Battery Level Meter |
| • |
Multiple Charging Status LEDs & Master Power Switch |
| • |
Size 11.8" x 8.9" x 5.2" / Weight 13-lbs (15-lbs with LAN-Cell 2) |
| • |
Standard Color: Black (other colors by special order) |
Detailed Cell-PAK Specifications
High Performance 3G Cellular Router
The Cell-PAK is specifically designed for the award winning Proxicast LAN-Cell 2 3G cellular router. It delivers the same unmatched flexibility and security for wireless communications. The Cell-PAK is available with an integrated LAN-Cell 2 3G cellular router or as an accessory for existing LAN-Cell 2 3G cellular routers.
The LAN-Cell 2 is a high-performance, commercial-grade, upgradeable, 3G mobile router with a built-in Wi-Fi 802.11 a/b/g wireless access point that
allows multiple PC's, laptops, handhelds, web-cams, POS terminals, and other Ethernet-based devices to simultaneously utilize
a single cellular data connection.
The LAN‑Cell 2 3G router supports today's fastest 3G cellular
standards, such as EV‑DO Rev(A) and HSDPA / HSUPA. With
some 3G services offering bandwidths of over 1,000 Kbps downstream
and 500 Kbps upstream, many applications requiring broadband
performance can now “go cellular”.
And with its 3G wireless modem
PC‑Card architecture, the LAN‑Cell 2 is a mobile router that is carrier independent and can easily be upgraded as newer and
faster cellular technologies, such as 4G, LTE and WiMAX become available.
Typical Applications
Emergency Management Communications
Disaster Management & Relief Efforts
Mobile Military & Defense Applications
Federal, State & Local Law Enforcement
First Responders & Relief Aid Workers
Mobile Security & Surveillance
Police, Fire & Emergency Vehicles
Boats & Marine Vessels
Construction Sites
Mobile Banking & ATMs
Road Warriors & Mobile Workers |
Mission Critical Communications
Homeland Security & Disaster Recovery
Humanitarian Aid & Assistance
Public Safety & Transpotation Applications
Video Surveillance, Webcams & Security
Temporary Off-Site Work Teams (e.g. auditors, engineers)
Insurance Adjusters Relief Workers
Mobile Retail & Credit Card Processing
Portable Traffic Monitoring & Control
Mobile Medical Monitoring
Backup For Wired Internet Connections
|
Click image for close-up
The Proxicast LAN-Cell 2 3G
Cellular Router (Mobile IP 3G Router) utilizes user
accessible upgradable high-speed PC-Card (PCMCIA / laptop)
3G modems and supports all CDMA & GSM 2.5G &
3G cellular modem standards including CDMA2000: EV-DO
RevA, EV-DO Rev0, 1xRTT; UMTS / W-CDMA: HSUPA, HSDPA,
HSPA, EDGE, and GPRS on all major wireless carriers
(cellular internet or broadband) worldwide including
Verizon Wireless, Sprint, Alltel, AT&T Mobility
(Cingular), T-Mobile, Rogers, Telus, Bell Mobility,
Telcel, Orange, Vodafone, O2, Telstra & others.
See the LAN-Cell 2 3G Router Product
Specifications page for a list of the currently
supported PC-Card 3G modems. The rugged LAN-Cell 2 3G
cellular router offers Ethernet, wireless WiFi (802.11
a/b/g) and serial interfaces plus advanced enterprise
mobile router features such as multiple IPSec VPN tunnels,
NAT/DMZ, SPI firewall, X.509 certificates, bandwidth
management and other wireless router functions which
are optimized for corporate, financial, mobile in vehicle,
industrial automation, Machine-to-Machine (M2M) telemetry
and SCADA type remote cellular WWAN applications. The
LAN-Cell 2 is also a great satellite data link alternative
or backup for Low Earth Orbit - LEO (ORBCOMM, Iridium,
Globalstar) and VSAT (HughesNet, Starband) satellite
network sites.
|
|