If you are powering the LAN-Cell 3G Cellular Router from a vehicle, marine, solar, battery, generator or other direct DC power source, the interVOLT SPCi-121207 is the perfect companion product to ensure that the LAN-Cell receives clean, stable power.
The SPCi-121207 is specifically designed to address the many issues associated with DC power sources including voltage surges, transients, noise, spikes, shorts, over-loads, high-temperatures, etc. The SPCi-121207 is a converter, stabilizer, isolator and regulator all built into a single package. It provides galvanic isolation (input to output) and is designed to protect the LAN-Cell's circuitry from damage due to power quality problems.
Innovative features. Rugged design. Simple installation. Peace-of-Mind.
(Also available in a step-down model for DC input sources between 17 VDC & 33 VDC. See PWR-SVCi-241208)
|
Input Voltage Range
|
10 – 16VDC
|
|
Output Voltage – Low Setting
|
12.5 VDC nominal
|
|
Output Voltage – High Setting
|
13.6 VDC nominal
|
Length Overall
|
170mm (6.690”)
|
Width Overall
|
80mm (3.150”)
|
Height Overall
|
40mm (1.575”)
|
|
Continuous Load Rating @ 30°C (80°F)
|
7 Amps @ 13.6VDC
|
|
Peak Load Rating @ 30°C (80°F)*
|
10 Amps @ 13.6VDC
|
Standby Current Draw
|
<20mA
|
Power Conversion Efficiency @ 30°C (80°F)
|
Typically 93%
|
Output Ripple
|
Less than 20mV Peak to Peak
|
Operating Temperature
|
-25°C to + 45°C
|
Operating Humidity
|
Ideally less than 90%
|
Enclosure Material
|
Marine grade aluminium dye anodised
|
End Cap Material
|
Injection moulded electrical grade ABS/PC plastic
|
Terminal Cover Material
|
Extruded temperature resistant ABS
|
Diagnostic Indicator
|
Tri-colour LED – monitoring input voltage, overload, short circuit and temperature.
|
Transient Voltage Protection
|
Filtering – Purpose designed circuit
|
Overload/Short Circuit Protection
|
Shutdown – Current sensing circuit (automatic reset)
|
Input Under Voltage Protection
|
Shutdown – Voltage sensing circuit (automatic reset)
|
Over Temperature Protection
|
Shutdown – Temperature sensing circuit (automatic reset)
|
Output Over Voltage Protection
|
Internal Fuse – Latching Zener circuit (not user serviceable)
|
Input Reverse Polarity Protection
|
Internal Fuse – Diode bypass circuit (not user serviceable)
|
Termination
|
Power – 6-32 UNC H/D screw terminal
|
Conformity
|
Australian AS/NZS CISPR 11. European EN55011. International CISPR11 and IEC61204-3.
|
Certification
|
EMC – Australian C Tick mark & European CE mark
|
Specification Sheet
Installation Manual
Part Number: PWR-SPCi-121207
 |
Additional images |
| |
|
|
|
Home 
Power Supplies & Adapters 
