|WiMAX mode is NOT supported by the PocketPORT. |
3G/CDMA mode IS supported.
Configure the PocketPORT before inserting the USB mode. After writing the configuration parameters to persistent memory, power off the PocketPORT, inserrt the USB modem and power the PocketPORT back on.
Signal strength will not display until the USB Modem Port has been set to ttyACM0 and the configuration has been saved and the PocketPORT restarted.
The CDMA antenna port is top one on the side closest to the "3G" LED.
The WiMAX antenna port is the top one on the side closest to the "4G" LED.