EtherLINQ-Firmware-Release-Notes.txt

====================================================
Version 5.2.17:

New:
- Added advanced parameter FORCEVZW=1 to force certain MVNO networks to use Verzion context settings even when MCC/MNC in not in the database.
- Added support for AMIT MDG200 module.

Updates:
- Fixed APN issue when switching between cellular carriers.

====================================================
Version 5.2.15:

Updates:
- Fixed MSS/PMTUD issue affecting firewall rules
- Reset default LTE MTU to 1428


====================================================
Version 5.2.13:

Updates:
- Added support for Quectel EC25-AF(D) module
- Fixed issue causing Verizon APNs to sometimes not be used correctly
- Improved reconnection time after LTE signal loss/return
- Fixed issue preventing AutoPing from being disabled on LTE
- Changed default LTE MTU to 1500


====================================================
Version 5.2.6:

Updates:
- Fixed issue preventing Always On VPN connections from sometimes resuming when forced closed by a remote site
- Fixed issue with Reboot on Disconnect
- Improved watchdog function monitoring unresponsive modem connections
- Improved automatic detection of active cellular carrier network
- Added support for Quectel EC25-AF module
- Added advanced parameter MYDHCPLEASE=n where n is the number of seconds to reserve a DHCP lease to LAN clients. Default lease time is 864000 sec (10 days).

====================================================
Version 5.2.5:

Updates:
- Fixed issue preventing some Verizon customers from obtaining static IP addresses

====================================================
Version 5.2.4:

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
IMPORTANT NOTE

Upgrading to release 5.2.4 or later will ERASE some configuration settings.

Export your current configuration file before upgrading, then re-import
the configuration file to prevent loss of settings.

For more information see Section 14.2 of the EtherLINQ User's Guide
http://shop.proxicast.com/support/files/EtherLINQ-User-Guide.pdf

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

New Features:
- Added IKEv2 support
- Added support for Quectel EC2x series modules
- Added FOTA support for EC2x modules
- Added LAC/TAC, Cell ID, CSQ to module info display

Updates:
- Made default LAN DHCP Pool parameters responsive to netmask selection
- Eliminated erroneous NO SIM message when module is initializing
- Removed NetworkType (NP) functionality
- Increased speed when saving parameters
- Fixed issue preventing GUI access to EtherLINQ through IPSec tunnels
- Fixed display issue on Signal Strength Graph
- Fixed remote support issue


====================================================
Version 5.1.9:

- Fixed issue affecting WAN/LAN2 port in NAT mode.

====================================================

Initial Production Release 5.1.8