EtherLINQ 4G/LTE SIM Router with WiFi, VPN, Firewall, GPS
- Integrated 4G LTE Modem with MIMO
- AT&T FirstNet and T-Mobile Band 71 Support
- 1 LAN + 1 WAN or 2 LAN Port (User Configurable)
- WAN Fail-Over / Fall-Back
- WiFi b/g/n Access Point (300 Mbps)
- IPSec VPN Client & Server
- NAT Router Mode with NAT/PAT
- Bridge Mode (WAN IP Pass-Through)
- Virtual Cable Mode
- Integrated GPS
- Integrated USB Webcam & Serial Device Servers
- Metal Chassis & Wide Input Voltage Range
The EtherLINQ is Proxicast’s fourth generation of enterprise-grade secure cellular gateways. This series features an embedded LTE cellular modem which seamlessly becomes a WAN interface for the EtherLINQ’s router and is fully integrated with all of its security, performance, and management capabilities. The LTE modem can serve as the primary Internet connection or as a fall-back to a wired Internet service.
The router is loaded with security features including IPSec client & server VPN, firewall and access control, NAT, port forwarding, DHCP server, an integrated USB Webcam server, serial device server, GPS functionality and many other powerful features required for complex and demanding applications. Proxicast’s exclusive “Virtual Cable Mode” is also supported for true remote bridging between other EtherLINQs and PocketPORTs.
The EtherLINQ has a built-in IEEE 802.11 b/g/n WiFi access point allowing WiFi devices to securely communicate with the EtherLINQ and access the wired network or Internet via the WAN/LTE.
Its small size and all metal construction make it the perfect choice for applications where a high-performance, secure, reliable and rugged cellular router is required.
3 Modes of Operation
|NAT Router Mode (Default)|
|Provides an Internet connection to an existing network of multiple Ethernet and WiFi devices|
|Bridge Mode (WAN IP Pass-Through)|
|Transfers the WAN IP address to a single device attached to the EtherLINQ|
|Virtual Cable Mode|
|Creates a secure Ethernet over WAN connection between multiple EtherLINQs or PocketPORTs
Read more in the EtherLINQ User's Guide.
The EtherLINQ works on all North American LTE networks including AT&T, T-Mobile, Verizon, U.S. Cellular, Bell Canada, Rogers, Telus and others.
- EtherLINQ Router
- 2x ANT-120-007 Cellular Antennas
- 2x ANT-130-002 WiFi Antennas
- Ethernet Cable
- AC/DC Power Supply
- Mounting Brackets
- SIM Size Adapter Kit
- QuickStart Guide
- Proxicast's 1 Year Limited Warranty
- Lifetime Free Firmware Upgrades
- Lifetime Free Technical Support
Limited Time Offer!
FREE USB WebCam included with every EtherLINQ.
|Dimensions||120 x 135 x 25 mm (excluding antennas & mounting bracket)
180 x 168 x 25 mm (including antenna & mounting bracket)
|Weight||18 oz (0.51 kg)|
|Power Specification||9-28 DC input (12 VDC typical)|
|Power Consumption||< 3W Typical|
|Operating Temp.||-22 to 140 F (-30~60 C)|
|Chassis||18 ga. Steel.
Desktop & Removable Mounting Brackets (included).
Kensington Security Slot (lock)
|Certifications||FCC Part 15
Class B, CE-EMC Class B, C-Tick Class B, VCCI Class B
Safety: CSA International, CE EN60950-1 (UL60950-1, CSA60950-1, EN60950-1, IEC60950-1) – RoHS Compliant
|LAN||1 LAN auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ45 Ethernet port|
|WAN / LAN 2||One auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45 Ethernet port.
Software definable as a second LAN port.
|USB 2.0||For USB webcams, serial devices and firmware loading|
|Power||4-pin Molex Mini-Fit with retention clip|
|Reset Button||Restores factory default settings & activates Configuration Mode|
|MicroSD Slot||For internal temporary storage|
|SIM||Mini SIM (2FF) for LTE modem. SIM size adapters included.|
|4G/LTE||2x2 MIMO SMA Female antenna jacks.
Two 5 dBi paddle style swivel antennas (SMA Male).
|WiFi||2x2 MIMO Reverse Polarity SMA (RP-SMA) Female antenna jacks.
Two 5 dBi rubber duck style swivel 802.11 b/g/n antennas (RP-SMA Male).
|GPS||SMA Female jack.
Active & Passive antennas supported.
|Technology||802.11 b/g/n 300 Mbps max|
|Operating Mode||Access Point|
|Security||WPA2-PSK, WPA-PSK, WEP, None|
|4G/LTE Modem (EtherLINQ Model EL-001 / EC25-AF)|
|Module||Quectel EC25-AF FCC ID: XMR201808EC25AF|
|Frequency Bands (MHz)||
B14: 700 (AT&T FirstNet)
B71: 600 (T-Mobile)
|Speeds (max)||LTE Category 4:
DL up to 150 Mbps
UL up 50 Mbps
|Supported Carriers||North America:
Verizon, AT&T, T-Mobile, U.S. Cellular
Bell, Rogers, Telus
|4G / LTE Features||4G/LTE to WAN Fail-Over and Fall-Back
4G/LTE Keep-Alive Packets
Signal Quality History Graph & Statistics
2x MIMO External Antennas Supported
|WAN Features||Static & DHCP Address Assignment
Assign WAN port to LAN or Disable port
WAN to 4G/LTE Fail-Over and Fall-Back
WAN Keep-Alive Packets
|Networking||LAN DHCP Server
WAN Fail-over Detection Limits & Controls
Port-Forwarding & Translation
IP Pass-Through (Bridge) Mode
Virtual Cable Mode (Ethernet over IP)
Dynamic DNS (DynDNS, NoIP)
Permanent DNS Address (serial#.etherlinq.net)
|IPSec VPN Features||IPSec Server and Client Modes
Site-to-Site & Remote User Access Tunnels
Unlimited Simultaneous IPSec Tunnels
IKEv1 & IKEv2 Internet Key Exchange
DES / 3DES / AES-128 / AES-192 / AES-256 Encryption
MD5 / SHA1 / SHA2-256 / SHA2-384 / SHA2-512 Authentication
Diffie-Hellmen Groups 1, 2, 5, 14, 15, 16, 17, 18
Dead Peer Detection (DPD)
|Virtual Cable Mode||Proprietary end-to-end tunneling through any firewall or network topology.
Interoperable with Proxicast’s PocketPORT devices in Virtual Cable Mode.
|Security Features||Network Address Translation & Firewall
HTTPS / SSL
Digitally Signed Firmware
|Internal Application Servers||Webcam, Serial Device, GPS|
|System Management||Web-based Management (Local & Remote)
Configuration Backup and Restore
Firmware Upgrade and Downgrade via web interface or USB drive
Scheduled System Restarts
Ping, Traceroute Utilities
EtherLINQ Support Topics
Download Firmware Images
You can search our Support Knowledge Base by clicking the icon below:
Or E-Mail your questions to: firstname.lastname@example.org